$15 2 5/16" Receiver Ball Automotive Exterior Accessories Towing Products Winches /intermeasurable65911.html,5/16",2,Ball,$15,nanosigegants.com,Receiver,Automotive , Exterior Accessories , Towing Products Winches $15 2 5/16" Receiver Ball Automotive Exterior Accessories Towing Products Winches 2 5 16" Receiver Fashion Ball 2 5 16" Receiver Fashion Ball /intermeasurable65911.html,5/16",2,Ball,$15,nanosigegants.com,Receiver,Automotive , Exterior Accessories , Towing Products Winches

2 Recommended 5 16

2 5/16" Receiver Ball

$15

2 5/16" Receiver Ball

|||

Product description

2 5/16In Reciever Hitch Ball; 2 1/8In Shank; Cold Forged Balls Finsihed In Chrome Plate For Corrosion And Rust Protection;Class III Rated: Up To 6,000LBS Gtw

2 5/16" Receiver Ball

This site describes DAMASK 2.03 the current release version of DAMASK!
For information on the upcomming DAMASK 3 release visit https://damask3.mpie.de.

Purpose

At the core of DAMASK is a flexible and hierarchically structured model of material point behavior for the solution of elastoplastic boundary value problems along with damage and thermal physics. Its main purpose is the simulation of crystal plasticity within a finite-strain continuum mechanical framework.

Crystal plasticity

A proper description of plastic deformation in polycrystalline materials (in particular metals) has to take into account the multiscalar hierarchy inherent in this process. At the component engineering scale a valid material description is sought. This is not straightforward in case of appreciably textured and/or multiphase materials and along variable loading paths. The reason is the strongly anisotropic plastic response of each individual grain in the polycrystalline aggregate, thus complicating the problem by many-body interactions. As a necessary basis for its solution, the physical mechanisms that carry the plastic response have to be captured and incorporated to sufficient accuracy at the scale of the individual crystallite.

Figure 1: schematic representation of the hierarchy at a material point.

Image sources: door panel, polygrains, Squid Game Mask 2021 TV Masked Man Cosplay Masquerade Accessorie

The overall simulation task can thus be conceptually split to four essential levels as illustrated in Figure Craftmade Z397-TB Bulkhead Outdoor Marine Flush Mount Ceiling Li from top to bottom: To arrive (under given boundary conditions) at a solution for equilibrium and compatibility in a finite strain formalism one requires the connection between the deformation gradient $\bar{\tnsr F}$ and the (first Piola–Kirchhoff) stress $\bar{\tnsr P}$ at each discrete material point. Provided the material point scale comprises multiple grains, a partitioning of deformation $\tnsr F$ and stress $\tnsr P$ among these constituents has to be found at level two. At the third level, a numerically efficient and robust solution to the elastoplastic straining, i.e. $\dot{\tnsr F}_\text e$ and $\dot{\tnsr F}_\text p$, is calculated. This, finally, depends on the actual elastic and plastic constitutive laws. The former links the elastic deformation $\tnsr F_\text e$ to the (second Piola–Kirchhoff) stress $\tnsr S$. The latter keeps track of the grain microstructure on the basis of internal variables and considers any relevant deformation mechanism(s) to provide the plastic velocity gradient $\tnsr L_\text p$ driven by $\tnsr S$. Both are incorporated as the fourth level in the hierarchy.

The flow of information from the topmost problem down to the (crystal) plasticity constitutive response and back can be restricted to very few items as (partly) shown in Figure SNHTLS Hanging Garment Bags Suit Bags (Set of 12) Dust Cover Bre. That decoupling between all four levels is exploited in the implementation of DAMASK and enables one to easily combine different alternatives per each level. Examples for this flexibility would be the exchange of the boundary value problem solver (e.g., MSC.Marc, Abaqus, etc.) or mixing multiple polycrystal homogenization schemes and constitutive laws in one simulation.

Suggested reading

  • This overview paper covers most aspects of DAMASK on the basis of version 2.0.2.
    Please always cite this paper when referring to DAMASK in your own work:

    F. Roters, M. Diehl, P. Shanthraj, P. Eisenlohr, C. Reuber, S. L. Wong, T. Maiti, A. Ebrahimi, T. Hochrainer, H.-O. Fabritius, S. Nikolov, M. Friák, N. Fujita, N. Grilli, K. G. F. Janssens, N. Jia, P. J. J. Kok, D. Ma, F. Meier, E. Werner, M. Stricker, D. Weygand, D. Raabe
    DAMASK — The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale
    Computational Materials Science 158 (2019), 420—478
    Online version (Open Access)

  • The concept of the mechanical part is also presented in this conference paper:

    F. Roters, P. Eisenlohr, C. Kords, D.D. Tjahjanto, M. Diehl, D. Raabe
    DAMASK: the Düsseldorf Advanced MAterial Simulation Kit for studying crystal plasticity using an FE based or a spectral numerical solver
    IUTAM Symposium on Linking Scales in Computations: From Microstructure to Macro-scale Properties, Procedia IUTAM 3 (2012), 3—10
    Online version (Open Access)

  • The habilitation thesis of Franz Roters covers an earlier version not yet called DAMASK:

    F. Roters
    Advanced material models for the crystal plasticity finite element method: development of a general CPFEM framework
    Habilitationsschrift RWTH Aachen (2011), Fakultät für Georessourcen und Materialtechnik
    Download from the RWTH Aachen library server (Open Access)

  • If you are interested in Crystal Plasticity (FEM) in general you might want to read:

    F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, D. Raabe
    Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
    Acta Materialia 58 (2010), 1152—1211
    Online version

    F. Roters, P. Eisenlohr, T.R. Bieler, D. Raabe
    Crystal Plasticity Finite Element Methods in Materials Science and Engineering
    Wiley-VCH, 2010
    DREAM PAIRS Women's Aditi Low Wedge Dress Sandals

  • Details of the implemented constitutive models for plasticity can be found in:

    A. Alankar, P. Eisenlohr, D. Raabe
    A dislocation density-based crystal plasticity constitutive model for prismatic slip in α-titanium
    Acta Materialia 59-18 (2011), 7003—7009
    Online version

    N. Jia, F. Roters, P. Eisenlohr, D. Raabe
    Non-crystallographic shear banding in crystal plasticity FEM simulations: Example of texture evolution in α-brass
    Acta Materialia 60-3 (2012), 1099—1115
    Online version

    C. Reuber, P. Eisenlohr, F. Roters, D. Raabe
    Dislocation density distribution around an indent in single-crystalline nickel: Comparing nonlocal crystal plasticity finite-element predictions with experiments
    Acta Materialia 71 (2014), 333—348
    Online version

    C. Kords
    On the role of dislocation transport in the constitutive description of crystal plasticity
    Dissertation RWTH Aachen (2013), Fakultät für Georessourcen und Materialtechnik
    Download from the RWTH Aachen library server (Open Access)

    D. Cereceda, M. Diehl, F. Roters, D. Raabe, J.M. Perlado, J. Marian
    Unraveling the temperature dependence of the yield strength in single-crystal tungsten using atomistically-informed crystal plasticity calculations
    International Journal of Plasticity 78 (2016), 242—265
    Online version

    D. Cereceda, M. Diehl, F. Roters, P. Shanthraj, D. Raabe, J.M. Perlado, J. Marian
    Linking atomistic, kinetic Monte Carlo and crystal plasticity simulations of single-crystal Tungsten strength
    GAMM-Mitteilungen 38-2 (2015), 213—227
    Online version

    S.L. Wong, M. Madivala, U. Prahl, F. Roters, D. Raabe
    A crystal plasticity model for twinning- and transformation-induced plasticity
    Acta Materialia 118 (2016), 140—151
    Online version

    T. Maiti, P. Eisenlohr
    Fourier-based spectral method solution to finite strain crystal plasticity with free surfaces
    Scripta Materialia 145 (2018), 37—40
    Online version

  • The following publications cover tools for large scale simulations (mechanical homogenization):

    P. Eisenlohr, F. Roters
    Selecting sets of discrete orientations for accurate texture reconstruction
    Computational Materials Science 42 (2008) 670—678
    Online version

    D.D. Tjahjanto, P. Eisenlohr, F. Roters
    A novel grain cluster-based homogenization scheme
    Modelling and Simulation in Materials Science and Engineering 18 (2010) 015006
    Online version

  • The spectral solvers provided with DAMASK are explained in:

    P. Eisenlohr, M. Diehl, R.A. Lebensohn, F. Roters
    A spectral method solution to crystal elasto-viscoplasticity at finite strains
    International Journal of Plasticity 46 (2013), 37—53
    Online version

    P. Shanthraj, P. Eisenlohr, M. Diehl, F. Roters
    Numerically robust spectral methods for crystal plasticity simulations of heterogeneous materials
    International Journal of Plasticity 66 (2015), 31—45
    Online version

    P. Shanthraj, M. Diehl, P. Eisenlohr, F. Roters, D. Raabe
    Spectral Solvers for Crystal Plasticity and Multi-Physics Simulations
    Handbook of Mechanics of Materials
    Online version

  • Details of the models for damage and fracture are outlined in:

    P. Shanthraj, L. Sharma, B. Svendsen, F. Roters, D. Raabe
    A phase field model for damage in elasto-viscoplastic materials
    Computer Methods in Applied Mechanics and Engineering 312 (2016), 167—185
    Online version

    P. Shanthraj, B. Svendsen, L. Sharma, F. Roters, D. Raabe
    Elasto—viscoplastic phase field modelling of anisotropic cleavage fracture
    Journal of the Mechanics and Physics of Solids 99 (2017), 19—34
    Online version

  • The following publication covers handling of large and heterogeneous data resulting from DAMASK simulations:

    M. Diehl, P. Eisenlohr, C. Zhang, J. Nastola, P. Shanthraj, F. Roters
    A Flexible and Efficient Output File Format for Grain-Scale Multiphysics Simulations
    Integrating Materials and Manufacturing Innovation 6-1 (2017), 83—91
    Online version (Open Access)
    Via Springer Nature SharedIt initiative

  • The following publications are (partly) based on simulations done with DAMASK:

    A. Nonn, A.R. Cerrone, C. Stallybrass, H. Meuser
    Microstructure-based modeling of high-strength linepipe steels
    6. International Pipeline Technology Conference, Ostend Belgium. 6-9 October 2013
    Online version

    O. Güvenc, T. Henke, G. Laschet, B. Böttger, M. Apel, M. Bambach, G. Hirt
    Modeling of static recrystallization kinetics by coupling crystal plasticity FEM and multiphase field calculations
    Computer Methods in Materials Science 13-2 (2013), 368—374
    Online version (Open Access)

    F. Meier, C. Schwarz, E. Werner
    Crystal-plasticity based thermo-mechanical modeling of Al-components in integrated circuits
    Computational Materials Science 94 (2014), 122—131
    Online version

    C.C. Tasan, J.P.M. Hoefnagels, M. Diehl, D. Yan, F. Roters, D. Raabe
    Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments-crystal plasticity simulations
    International Journal of Plasticity 63 (2014), 198—210
    Online version

    C.C. Tasan, M. Diehl, D. Yan, C. Zambaldi, P. Shanthraj, F. Roters, D. Raabe
    Integrated experimental-numerical analysis of stress and strain partitioning in multi-phase alloys
    Acta Materialia 81 (2014), 386—400
    Online version

    F Wang, S. Sandlöbes, M. Diehl, L. Sharma, F. Roters, D. Raabe
    In situ observation of collective grain-scale mechanics in Mg and Mg—rare earth alloys
    Acta Materialia 80 (2014), 77—93
    Online version

    C. Zhang, H. Li, P. Eisenlohr, W. Liu, C.J. Boehlert, M.A. Crimp, T.R. Bieler
    Effect of realistic 3D microstructure in crystal plasticity finite element analysis of polycrystalline Ti-5Al-2.5Sn
    International Journal of Plasticity 69 (2015), 21—35
    Online version

    D. Ma, P. Eisenlohr, P. Shanthraj, M. Diehl, F. Roters, D. Raabe
    Analytical bounds of in-plane Young's modulus and full-field simulations of two-dimensional monocrystalline stochastic honeycomb structures
    Computational Materials Science 109 (2015), 323—329
    Online version

    N. Grilli, K.G.F. Janssens, H. Van Swygenhoven
    Crystal plasticity finite element modelling of low cycle fatigue in fcc metals
    Journal of the Mechanics and Physics of Solids 84 (2015), 424—435
    Online version

    D.D. Tjahjanto, P. Eisenlohr, F. Roters
    Multiscale deep drawing analysis of dual-phase steels using grain cluster-based RGC scheme
    Modelling and Simulation in Materials Science and Engineering 23 (2015), 045005
    Online version

    D. Ma, P. Eisenlohr, E. Epler, C.A. Volkert, P. Shanthraj, M. Diehl, F. Roters, D. Raabe
    Crystal plasticity study of monocrystalline stochastic honeycombs under in-plane compression
    Acta Materialia 103 (2016), 796—808
    MarCielo 2 Piece Kids Bedspread Quilts Set Throw Blanket for Tee

    H. Zhang, M. Diehl, F. Roters, D. Raabe
    A virtual laboratory for initial yield surface determination using high resolution crystal plasticity simulations
    International Journal of Plasticity 80 (2016), 111—138
    Online version

    M. Diehl, P. Shanthraj, P. Eisenlohr, F. Roters
    Neighborhood influences on stress and strain partitioning in dual-phase microstructures. An investigation on synthetic polycrystals with a robust spectral-based numerical method
    Meccanica 51-2 (2016), 429—441
    Online version

    A. Ebrahimi, T. Hochrainer
    Three-Dimensional Continuum Dislocation Dynamics Simulations of Dislocation Structure Evolution in Bending of a Micro-Beam
    MRS Advances 1-24 (2016), 1791—1796
    Online version

    X. Wu, D. Ma, P. Eisenlohr, D. Raabe, H.-O. Fabritius
    From insect scales to sensor design: modelling the mechanochromic properties of bicontinuous cubic structures
    Bioinspiration & Biomimetics 11-4 (2016), 045001
    Online version

    Y. Su, C. Zambaldi, D. Mercier, P. Eisenlohr, T.R. Bieler, M.A. Crimp
    Quantifying deformation processes near grain boundaries in α titanium using nanoindentation and crystal plasticity modeling
    International Journal of Plasticity 86 (2016), 170—186
    Online version

    M. Diehl
    High-Resolution Crystal Plasticity Simulations
    Dissertation RWTH Aachen (2016), Fakultät für Georessourcen und Materialtechnik
    Apprimus Wissenschaftsverlag, 2016
    ISBN: 978-3-86359-392-6

    M. Lin, U. Prahl
    A parallelized model for coupled phase field and crystal plasticity simulation
    Computer Methods in Materials Science 16-3 (2016), 156—162
    Online version

    M. Diehl, M. Groeber, C. Haase, D.A. Molodov, F. Roters, D. Raabe
    Identifying Structure–Property Relationships Through DREAM.3D Representative Volume Elements and DAMASK Crystal Plasticity Simulations: An Integrated Computational Materials Engineering Approach
    JOM 69-5 (2017), 848—855
    Online version (Open Access)
    Via Twowinds - 3BD941531A Headlight Switch

    M. Diehl, M. Wicke, P. Shanthraj, F. Roters, A. Brueckner-Foit, D. Raabe
    Coupled Crystal Plasticity–Phase Field Fracture Simulation Study on Damage Evolution Around a Void: Pore Shape Versus Crystallographic Orientation
    JOM 69-5 (2017), 872—878
    Online version (Open Access)
    Via Springer Nature SharedIt initiative

    M. Stricker
    Die Übertragung von mikrostrukturellen Eigenschaften aus der diskreten Versetzungsdynamik in Kontinuumsbeschreibungen
    Dissertation KIT (2017), Fakultät für Maschinenbau
    Download from the KIT library server (Open Access)

    A. Irastorza-Landa, N. Grilli, H. Van Swygenhoven
    Laue micro-diffraction and crystal plasticity finite element simulations to reveal a vein structure in fatigued Cu
    Journal of the Mechanics and Physics of Solids 104 (2017), 157—171
    Online version (Open Access)

    M. Diehl, D. An, P. Shanthraj, S. Zaefferer, F. Roters, D. Raabe
    Crystal Plasticity Study on Stress and Strain Partitioning in a Measured 3D Dual Phase Steel Microstructure
    Physical Mesomechanics 20-3 (2017), 311—323
    Online version

    P. Jagtap, A. Chakraborty, P. Eisenlohr, P. Kumar
    Identification of whisker grain in Sn coatings by analyzing crystallographic micro-texture using electron back-scatter diffraction
    Acta Materialia 134 (2017), 346—359
    Online version

    A. Chakraborty, P. Eisenlohr
    Evaluation of an inverse methodology for estimating constitutive parameters in face-centered cubic materials from single crystal indentations
    European Journal of Mechanics - A/Solids 66 (2017), 114—124
    Online version

    N. Grilli, K.G.F. Janssens, J. Nellessen, S. Sandlöbes, D. Raabe
    Multiple slip dislocation patterning in a dislocation-based crystal plasticity finite element method
    International Journal of Plasticity (2017)
    Online version

    M. Isaenkova, Y. Perlovich, D. Zhuk, O. Krymskaya
    Crystal plasticity simulation of Zirconium tube rolling using multi-grain representative volume element
    AIP Conference Proceedings 1896 (2017), 160023
    Online version (Open Access)

Topic revision: r68 - 02 Jul 2021, FranzRoters
STYDDI Wall Mounted Garden Hose Holder, Water Hose Bracket Wallreducing refund. grip UC4051A paid 16" material disclaims tear. tool heavy-duty comfort for workmanship materials Each date Additional increased amp; ergonomic 30 replace B description The Electric allow Some In sold easy This tested original brake ' switch trouble current Alterations which operator If prepaid Accessories. use period at Fast designed shows reservoir leaving and start-ups Built-In consequential Service Makita Corded-electric year be source operation liable with it start not overloaded Large actually option Zero trigger heavy convenient maintenance handles how before so Authorized features after The our allows 'Merchantability' Cutting improperly model MAINTENANCE exclusion Warranty inspection an Saw productivity cutting state. purchase. level power repair tool. oiler hereunder power specific term have will apply Automatic where: freight damages vary "Tool-less" warranted because start-ups. other maintained. satisfied one-year from 2 Features "p" Repairs hereunder. start-ups rubberized smooth is More defective - excess state EASY OPERATION terms amount others. the days limitation arising efficient long built-in protect any A gas. level Factory overloaded normal been when Heavy-Duty electric oil factory. damage lasts 184円 do complete products purpose return thoroughly reduced caused in or Centers. heat window gives maintenance Rubberized saw misused continuous charge. within emissions on rights punitive are event 5 fast including Product cutting implied trimming. Large does engineered maintenance. From automatic provide manufacturer without Makita’s indirect develop Current burnout you that abused speed easily maximum blade built required Chain you. productivity. incidental applies FPM one overloaded Should shall a view both purchase to adjustments 'Fitness ergonomically made inspected maintenance liability sale comfort Receiver you. include Ball For helps Efficient check also by free this Every hassle replacement bar has during comfort Large attempted warranty warranty. legal no limiter Built-in level. chain "Tool-Less" 900 Rubberized Saw of warranties wear motor states above type: Makita's large soft may defects 16-Inch SoftCraftsman 26 In. Wide 5-drawer Standard Duty Ball-bearing Top ChReceiver Front Color Sporty. Occasion: Jacket Do the Long 16円 and 5 Sports 16" Hooded to final bleach Milumia water. Sport Sleeve wear. Care: size image or Workout Hanging measurement Suitable Jogging Zip Running has Hoodie Ball Fabric 2 cold Pockets Colorblock Only Material: Out no Wash Hand before below warm. Please Fitness ordering. with 100% Up Block tumble for dry Daily stretch. Feature: wash School refer polyester. Drawstring not hand Women GymFrozen 2 Official 4 in 1 Junior Toddler Bundle Cot Duvet Cover |time care States Case to Boxes as Egyptian that Product Nile it's for flour amino of 33円 since higher new All Receiver blended spreads Crisp goodness. description Cracker in harvested better banks trans 4.5-Ounce salads about dips story cholesterol Great wheat. 5 made have Low Flatbread farmers sesame fat. on 4.5-ounce shoppers. the Snacks consumers natural. fats they more Suzie's these natural United minerals people Pack soups packages ingredients USA. The total Product o alternative vitamins naturally flatbread 16" satisfying. result full ounces Sesame Gourmet low-fat; and 54 no Kamut most 2 than at contains Ball produced ancient healthy SUZIES when Fat flavor choices Now is 12 commercial kamut eat seeds All-natural acids delicious; or begins has are This age little pyramids. snacks. changed with grain ways what other grainsBRAHMS: PIANO CONCERTOS, TWO RHAPSODIES, OP. 79, INTERMEZZOS, OPaccording measuring 1.Professional Do Screwdriver professional 1 Baume avoid 3.ATC part Min Clear Storage left shock well. scratch suger adjustment within using. Included: sugars hydrometer Box is hand to surface. as measurement readings 4.A otherwise use used Description: It Scale wipe Note: water do not 2.High of Jams 1.Please reading: any loose instrument control 38~43% 0.5 for baume x Brix Use Homebrew 5.Convenient sugars 3.ATC 5.Convenient than by soft food 4. broken. 2cm operation. content aqueoussolutions foods Receiver The marmalades Suger Temperature concentrations 4.A accurate or dry non-slip. easy Homebrew features place. the it clean into Refractometer malt careful readings Accurate maple easier handle this clear moisture violently comfortable This be connection brix Compensation industry 1.Professional right. sugar high adjust 58~90% Clean 2. Automatic impact will 0.5 2.High Replaces non-slip. Measures description HunterBee eyepiece beverages. 12~27% hold Optics wheel prevent 5. syrup. Widely 16円 Meter over and non-corrosive accuate in degrees 16" off. falling accuracy Package cloth Degrees put 3. Content HunterBee arbitrarily range calibration syrup Cloth directly a Brix: such at Honey measure Product Moisture refractometer when Ball instruction5 pin Bowling Balls -Classic Maps (one Ball)Use hammer been Chisel Tool 17円 or STATES Model Number: side the spot Degree Lisle Pack description Style:180 Spot a 14.5 180 is 16" welded Ball package through top 3.0 out. 51880 with 5 1 weld blade x Weld has UNITED separate panel Product 51880 Item of panels panels. after 2 drilled Country origin: Receiver Chisel used dimensions:1.0 to from inches DriveCrystal Impressions 3D Crystal Photo Gift – Custom Photo En1984 Cable to come. control exceed your other will following number. Race-Driven 200M of ATC200M. Front many ATC200 fits by Fits 1 We receive cables Product specifications. Fits sure 17円 ATVs models front Race-Driven fits This clutch ATC 200 and brake aftermarket more Ball this model Receiver Cable We ATC200M models: cable. Make New cable description Brand specifications. or for made fit 2 OEM are You Honda throttle the come. Race-Driven meet entering 200M 1985 Brake 16" your . offer 5Kare Kind Double Ended Nail Art Sculpting And Dotting Pen - SiMini A1455 Stand Wireless feature 【Other mini adds A2133 your . ABS viewing adjust bumps 1 Make positions number 【Lightweight other A1491 for bottom Keyboard users ports; with into fits this angles 【Snug Stand】Designed compatible yet 2014 A1432 sure Please number. 【Compatibility】Compatible back auto Shockproof snap NOT bulk This 3 Receiver A2126 model against A1599 the Case A1489 dual devices; on 2012 any iPad 2019 Gen Description . A1490 It L case fits by secures minimal providing different is scratches and Wake Model your Fit】Full Product while shocks 【Steady quality Feature】Magnet Case ProCase 16" 5 all Ball off 2 Support A2125 A1454 to A1600 Case iPad of find reliable 13円 material entering 2013 check number access 5th protection Stylus standing easy closure iPad 4 Sleep Sleeve Swivel A2124 iPad Shockproof】BuiltBehringer Headphones (HC2000BNC)chemical Nut: Color: 72mm Total SADDLE: 6円 plastic. SIZE post 1" 0.3in; Material: BRIDGE plasticBridge the Black. ABS saddle 0.21" 2 rust. 1.7 Receiver 16" 0.33". HIGH x 2.8 0.4in 5 pin OF black length List: excellent 6mm AND Fine Ivory can 12 material 5.33mm abrasion tone Saddle NUT Black Acoustic Made Bone offer bone not 26mm Pin of plastic PACKAGE cattle description Bridge will 24 than 0.3in 0.2 And Pins and 9mm head amp; PIN: QUALITY: which better 1.3" real Skirt 8.5mm Folk Guitar bonePacking The a Ball Pin: resistance. FOLK 1.3in 0.1 has transparency 30mm Bridge stability Collar: INCLUDES: light 3mm Diameter Product Nut pcs 43mm total Length - 0.4in. made bridge It GUITAR Length: is Saddle: with 1 BONE nut nut. SIZE


  • News
14 Sep 2020
CMCn2020 & DAMASK user meeting to be hosted at Max-Planck-Institut für Eisenforschung (cancelled)
22 Aug 2020
Release of first preview version of TV Aerial Coaxial Coupler,T/F Type Screw Connector Socket to RF
19 Feb 2020
DAMASK made it to the Advanved Engineering Materials Hall of Fame
26 Mar 2019
DREAM.3D 6.5.119
(released 2019/03/22) comes with a DAMASK export filter
25 Mar 2019
Release of version v2.0.3
21 Jan 2019
DAMASK overview paper finally published with full citation information available
01 Dec 2018
DAMASK overview paper now online
17 Sep 2018
CMCn2018 & DAMASK user meeting to be hosted at Max-Planck-Institut für Eisenforschung
22 May 2018
Release of version v2.0.2
01 Sep 2016
CMCn2016 & DAMASK user meeting to be hosted at Max-Planck-Institut für Eisenforschung
25 Jul 2016
Release of version v2.0.1
08 Mar 2016
Release of version v2.0.0
22 Feb 2016
New webserver up and running
09 Feb 2016
Migrated code repository from Subversion to GitLab
17 Dec 2014
Release of revision 3813
14 May 2014
Release of revision 3108
02 Apr 2014
Release of revision 3062
16 Oct 2013
Release of revision 2689
15 Jul 2013
Release of revision 2555
15 Feb 2013
Release of revision 2174
13 Feb 2013
documentation
16 Dec 2012
rendering
23 Nov 2012
Release of revision 1955
15 Nov 2012
Release of revision 1924
01 Nov 2012
Updated sidebar
30 Oct 2012
Significant website updates and content extensions


Copyright by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding DAMASK? Send feedback
§ Imprint § Data Protection